Products

CIN’s new generation range of intumescents has been reinforced with the brand-new C-THERM® S110 and C-THERM® S111 FD products. These are solvent based single component coatings that, under heat, produce a very low thermal conductivity foam which confers insulating properties, passively protecting the metallic structures from fire. The Fast Dry (FD) versions stand out due to its extra quick drying capacity.

MAIN APPLICATIONS

C-THERM® S110 and C-THERM® S111 FD products are used in the passive protection of metallic structures against fire, for off-site and on-site applications.

PROPERTIES

• Fire protection up to 150 minutes
• Solids by volume: 75%
• Recommended DFT per coat1: up to 1500 μm
• Dry-to-touch time: 30 minutes
• Dry-to-handle time: 3 hours

APPROVALS AND CERTIFICATES

Fire Resistance: C-THERM® S110 and C-THERM® S111 FD are certified in accordance with EN13381-8.

CE Marking: C-THERM® S110 and C-THERM® S111 FD have CE Marking in accordance with EAD 350402-00-1106 (former ETAG 018).

C-THERM® S100 and C-THERM® S101 FD are CIN’s next generation of products that provide passive fire protection. These are solvent based single component coatings that, under heat, produce a very low thermal conductivity foam which confers insulating properties, passively protecting the metallic structures from fire. C-THERM® S101 FD stands out due to its extra quick drying capacity.

MAIN APPLICATIONS

C-THERM® S100 and C-THERM® S101 FD products are used in the passive protection of metallic structures against fire.

PROPERTIES

• Solids by volume: 75%
• Recommended DFT per coat1: up to 1500 μm
• Dry-to-touch time: 30 minutes
• Dry-to-handle time: 3 hours
• Competitive protection product for 90 minutes

APPROVALS AND CERTIFICATES

Fire resistance: C-THERM® S100 and C-THERM® S101 FD are certified in accordance with EN13381-8.

CE Marking: C-THERM® S100 and C-THERM® S101 FD have CE Marking in accordance with EAD 350402-00-1106 (former ETAG018).

PRODUCT DESCRIPTION
Elastic adhesive for seams, based on MS Polymer.

PRODUCT CHARACTERISTICS

• One part, easy to use.
• No schrinkage, solventless and isocyanate free.
• Very good elasticity, it supports, with no tears, thermal expansions substrates.
• Seam acoustic insulation grow.
• Good adhesion to many surfaces.

TYPICAL APPLICATIONS (professional use)
For teak and synthetic deck sealing.

APPROVALS

MS 935 has been certified in accordance with Module-B of Dir.96/98/EC and amended as:
SURFACE MATERIALS AND FLOOR COVERINGS WITH LOW FLAME-SPREAD CHARACTERISTICS: COVERINGS FOR FLOORS AND ADHESIVES USE IN THE CONSTRUCTION OF “A”, “B” & “C” CLASS DIVISIONS. MED/3.18 (c) - MED/3.18 (e). Certificate 0987/MED-B/1006.

MS 935 has been certified in accordance with Module-D of Dir.2014/90/EU e Reg.(EU) 2022/1157, NO.MEDD000003U by DNV. Issued 13-09-2023. NB0575

Applications / Limitations of use
The material fulfils the requirements of FTP Code (2010) Annex 1, Part 2 and 5.
Calorific value to be less than 45 MJ/m2 when required.
The compliance is valid for:
1. AII the colours.
2. The weight of 284 g/m2 (to which a tolerance of ± 5% may be applied).

Available packaging/colours:

Anthracite grey in 600ml sachet

Anthracite grey in 5kg pails

PRODUCT DESCRIPTION
A neutral, MS Polymer-based, one-component sealant with rapid ambient humidity curing.
After cure the product reveals high elastic properties and excellent UV rays and humidity resistance.

PRODUCT CHARACTERISTICS

• Solventless and isocyanates free.
• Virtually no schrinkage and no bubble formation.
• Flexible at low (-40°C) and high (+100°C) temperatures.
• Neutral, odourless, safe in use.
• Compatible with most paints systems.
• It can be sanded and cutted soon after application.
• Good adhesion to wood, metals, fiberglass, previously treated.
• Good resistance to UV rays and to salt water.

TYPICAL APPLICATIONS (professional use)
Expansion joint for teak decks.

APPROVALS
MS 945 has been certified in accordance with Module-B of Dir.96/98/EC and amended as:
SURFACE MATERIALS AND FLOOR COVERINGS WITH LOW FLAME-SPREAD CHARACTERISTICS: COVERINGS FOR FLOORS AND ADHESIVES USE IN THE CONSTRUCTION OF “A”, “B” & “C” CLASS DIVISIONS. MED/3.18 (c) - MED/3.18 (e). Certificate 0987/MED-8/1007.

MS 945 has been certified in accordance with Module-D of Dir.2014/90/EU e Reg.(EU) 2022/1157, NO.MEDD000003U by DNV. Issued 13-09-2023. NB 0575

Applications / Limitations of use
The materiai fulfils the requirements of FTP Code (2010) Annex 1, Part 2 and 5.
Calorific value to be less than 45 MJ/m2 when required.
The compliance is valid for:
1. AII the colours.
2. The weight of 320 g/m2 (to which a tolerance of ± 5% may be applied).

Available packaging/colours:

Black in 290ml cartridge and 600ml sachet

White in 290ml cartridge and 600ml sachet

Gray in 290ml cartridge and 600ml sachet

PRODUCT DESCRIPTION
High performance structural adhesive/sealant with rapid ambient humidity curing.
After cure the product reveals high elastic properties and excellent UV rays and humidity resistance.

PRODUCT CHARACTERISTICS
• Fast cure and easy to use.
• Paintable after a few minutes.
• High tensile strength and excellent resistance to extreme mechanical stress.
• Good adhesion onto a wide range of materials without primer.
• Excellent UV rays and weather resistance. Isocyanate free and solventless.

TYPICAL APPLICATIONS (professional use)
• For sealing marble, corian , mirrors.
• Underwater hull mechanical seal (sea inlet, flap, stabilizer fins).
• For sealing thruster.
• Line shafting supports.
• Deck fitting.

APPROVALS
MS 950 has been certified in accordance with Module-B of Dir.96/98/EC and amended as:
SURFACE MATERIALS AND FLOOR COVERINGS WITH LOW FLAME-SPREAD CHARACTERISTICS: COVERINGS FOR FLOORS AND ADHESIVES USE IN THE CONSTRUCTION OF “A”, “B” & “C” CLASS DIVISIONS. MED/3.18 (c) - MED/3.18 (e).
Certificate 0987/MED B/1008.

MS 950 has been certified in accordance with Module-D of Dir.96/98/EC, NO.MED-D-1608 by DNV.
Issued 13-09-2023. NB 0575

Applications / Limitations of use
The materiai fulfils the requirements of FTP Code (2010) Annex 1, Part 2 and 5.
Calorific value to be less than 45 MJ/m2 when required.
The compliance is valid for:
1. AII the colours.
2. The weight of 277,4 g/m2 (to which a tolerance of ± 5% may be applied).

Available packaging/colours:

Black in 290ml cartridge and 600ml sachet

White in 290ml cartridge and 600ml sachet

PRODUCT DESCRIPTION
Perimeter sealant for glazed units and teak decks, based on MS Polymer.

PRODUCT CHARACTERISTICS
• Fast cure and easy to use. Compatible with most industrial paints.
• Excellent adhesion on mineral glass, fiberglass, steel, and anodized aluminium.
• Compatible with most synthetic glass available on the market.
• Excellent UV rays and weather resistance. Isocyanate free and solventless.

TYPICAL APPLICATIONS (professional use)
• For sealing marble, corian, mirrors.
• Underwater hull mechanical seal (sea inlet, flap, stabilizer fins).
• For sealing thruster.
• Line shafting supports.
• Deck fitting.
• For assembling bulb keel.
• For perimetral sealing of glasses, deck teak, for assembling hull-deck.

APPROVALS
MS 952 has been certified in accordance with Module-B of Dir.96/98/EC and amended as:
SURFACE MATERIALS AND FLOOR COVERINGS WITH LOW FLAME-SPREAD CHARACTERISTICS: COVERINGS FOR FLOORS AND ADHESIVES USE IN THE CONSTRUCTION OF “A”, “B” & “C” CLASS DIVISIONS. MED/3.18 (c) - MED/3.18 (e). Certificate 0987/MED-B/1009.

MS 952 has been certified in accordance with Module-D of Dir.2014/90/EU e Reg.(EU) 2022/1157, NO.MEDD000003U by DNV. Issued 13-09-2023. NB 0575

Applications / Limitations of use
The materiai fulfils the requirements of FTP Code (2010) Annex 1, Part 2 and 5.
Calorific value to be less than 45 MJ/m2 when required.
The compliance is valid for:
1. AII the colours.
2. The weight of 290 g/m2 (to which a tolerance of ± 5% may be applied).

Available packaging/colours:

Black in 290ml cartridge and 600ml sachet

Gray in 290ml cartridge and 600ml sachet

PRODUCT DESCRIPTION
Fast grip structural adhesive/sealant, based MS Polymer.

PRODUCT CHARACTERISTICS
• High green strength. Paintable after a few minutes.
• High tensile strength and excellent resistance to extreme mechanical stress.
• Good adhesion onto a wide range of materials without primer.
• Excellent UV rays and weather resistance.
• Isocyanate free and solventless.
• Almost no schrinkage after drying.

TYPICAL APPLICATIONS (professional use)
• For sealing marble, corian , mirrors.
• Underwater hull mechanical seal ( sea inlet, flap, stabilizer fins).
• For sealing thruster.
• Line shafting supports.
• Deck fitting.

APPROVALS
MS 955 has been certified in accordance with Module-B of Dir.96/98/EC and amended as:
SURFACE MATERIALS AND FLOOR COVERINGS WITH LOW FLAME-SPREAD CHARACTERISTICS: COVERINGS FOR FLOORS AND ADHESIVES USE IN THE CONSTRUCTION OF “A”, “B” & “C” CLASS DIVISIONS. MED/3.18 (c) - MED/3.18 (e). Certificate 0987 MED B/1011.

MS 955 has been certified in accordance with Module-D of Dir.2014/90/EU e Reg.(EU) 2022/1157, NO.MEDD000003U by DNV. Issued 13-09-2023. NB 0575

Applications / Limitations of use
The materiai fulfils the requirements of FTP Code (2010) Annex 1, Part 2 and 5.
Calorific value to be less than 45 MJ/m2 when required.
The compliance is valid for:
1. AII the colours.
2. The weight of 302 g/m2 (to which a tolerance of ± 5% may be applied).

Available packaging/colours:

Black in 290ml cartridge and 600ml sachet

White in 290ml cartridge and 600ml sachet

PRODUCT DESCRIPTION
Adhesive for glass windows, based on MS Polymer.

PRODUCT CHARACTERISTICS
• High viscosity and high initial grip.
• Almost no shrinkage.
• Permanently elastic at a temperature ranging from -40°C to +120°C.
• To be used in combination with the darkening primer “G / GX” on uncoated glasses.
• Very good resistance to UV rays.
• Open time suitable for high dimensioned glass windows.

TYPICAL APPLICATIONS (professional use)
• For sealing of glasses.
• For sealing plexiglas (previous technical testing is always recommended).

APPROVALS
MS 960 has been certified in accordance with Module-B of Dir.96/98/EC and amended as:
SURFACE MATERIALS AND FLOOR COVERINGS WITH LOW FLAME-SPREAD CHARACTERISTICS: COVERINGS FOR FLOORS AND ADHESIVES USE IN THE CONSTRUCTION OF “A”, “B” & “C” CLASS DIVISIONS. MED/3.18 (c) - MED/3.18 (e). Certificate 0987/MED B/1012.

MS 960 has been certified in accordance with Module-D of Dir.2014/90/EU e Reg.(EU) 2022/1157, NO.MEDD000003U by DNV. Issued 13-09-2023. NB 0575

Applications / Limitations of use
The materiai fulfils the requirements of FTP Code (2010) Annex 1, Part 2 and 5.
Calorific value to be less than 45 MJ/m2 when required.
The compliance is valid for:
1. AII the colours.
2. The weight of 292 g/m2 (to which a tolerance of ± 5% may be applied).

Available packaging/colours:

Black in 290ml cartridge and 600ml sachet

NATURE OF THE PRODUCT
MS Polymer series sealants adhere without primers to many materials. Technical experience and laboratory tests have shown that on some substrates, adhesion develops only through pretreatment with Primer and that on others, due to the variability of surface conditions, it is useful to carry out test applications to determine the type of preparation required and the possible need for surface treatment.

PRODUCT CHARACTERISTICS
Specific primer for the treatment of wood and porous materials. It provides stability and high levels of adhesion in conditions of high humidity and high temperature ranges. Suitable for treating teak staves in the production and installation of decks in the nautical sector.

•Application: by brush

•Drying time: approx. 20 minutes.

•Consumption: depends on the porosity of the substrate, approximately 3–5 m²/l.

Available packaging/colours:

Clear in 1kg aluminium bottle

NATURE OF THE PRODUCT
Z.FIX CLEAR N is a multifunctional, low-viscosity, clear and transparent, fast two-part liquid epoxy system, suitable for use as a rigid structural adhesive, as is or can be mixed with special fillers, in this case also to obtain stucco with excellent sandability. Low greasiness to the touch even at low temperatures and high humidity.

APPLICATIONS (for professional use)
Thanks to its low viscosity, Z.FIX CLEAR N can be used:

1. Brush, roller, spray as an undercoat for wood, as a consolidating primer for wood for subsequent structural bonding, for structural bonding of fibreglass (GFRP) and composites, wood, especially suitable on aluminium and steel. For bonding glass, carbon and kevlar onto wood and fibreglass. For anti-osmosis treatments.

2. Admixed with suitable fillers such as Z.FIX CARICA, Z.FIX FIBRA MINERALE, Z.FIX FIBRA NATURALE, Z.FIX CARICALIGHT N it can be rendered:
• Thixotropic and non-running for vertical applications.
• Reinforced for particularly demanding bonding.
• Easily sandable stucco.
• Lightweight stucco with low specific weight, extremely sandable, for levelling even large irregular surfaces.

Available packaging/colours:

Clear in 0,750kg bottle (Part-A) and 0,450kg bottle (Part-B)

Clear in 8,33kg jerrycan (Part-A) and 5kg jerrycan (Part-B)