ITALKROM MARINE & YACHT

MGL001 is a 2K acrylic high gloss clearcoat, specially designed for the yachting manufacturing and maintenance industry. It is fast-drying, easy to apply, characterized by high elasticity and transparency, excellent anti-scratch properties and excellent resistance to solar light and environmental factors. It can be applied either directly to metal, polyester and wooden surfaces, or as a high gloss clear finish on already painted surfaces, which have previously been properly cleaned and sanded.

Colors: Clear, transparent
Packaging: 800gr
Preparation: hardener MH22 (25% w/w or 4:1 v/v), thinner ΜΤΗ25 or MTH26 15-25%
Yield: 12-14m²/kg (90gr/coat)

EXTREME OIL is a solvent-based product ideal for painting and maintaining wooden deck floorings and wooden yacht linings. The product is made from special precious oils, which enhance the natural beauty of the wood and the addition of special UV filters, protects the wooden surface for a long time, limiting its natural discoloration. The main properties of this product, in addition to its excellent UV resistance, are: excellent penetration into the wood, limited change of the natural color of the wood after application, maintaining a natural effect, fast drying times, allowing application more than one layer in a short period of time, and maintaining a uniform wooden surface over time, limiting damage, caused by lignin (tannins).

Colors: Semitransparent amber
Packaging: 1Lt
Preparation: product ready-to-use, no hardener or thinner needed
Yield: 2-3 layers on raw wood, 1 layer for maintenance

MH03 is an epoxy hardener, used to dilute epoxy products, such as M35EPR.

Packaging: 200ml

ΜΗ22 is an acrylic HS (high solid) hardener, used to dilute acrylic and PU products, such as M20MT, M20GL, M27GL, M53DTM, M43DTM, MMT001 & MGL005.

Packaging: 0,5Lt & 200ml

MH32 is the hardener of the insulating agent ΜΙ21.

Packaging: 100ml

MTH25 is an medium (normal) PU thinner, used to dilute 2K akrylic and PU products, such as M20MT, M20GL, M27GL, M53DTM, M43DTM, MMT001 & MGL005.

Packaging: 1Lt

MTH26 is a slow PU thinner, used to dilute 2K akrylic and PU products, such as M20MT, M20GL, M27GL, M53DTM, M43DTM, MMT001 & MGL005.

Packaging: 1Lt

MTH30 is a nitro thinner, used to dilute 1K alkyd products, such as M10MT & M10GL.

Packaging: 1Lt

MTH50 is an epoxy thinner, used to dilute epoxy products, such as M35EPR.

Packaging: 1Lt